2012/11/15 日本語は下にあります。 ve3cgc@hotmail.com
“A 2E26 QRP transmitter” 「2E26 QRP 送信機」
I homebrewed a 2E26 tube CW, Xtal controlled transmitter generating about 4watts.
The schematic was given to me by W9TFC. I made some modifications on the Pi coil to handle multi bands and it works well on 40m to which I normally go on air.
I obtained three tubes of 2E26 from VE6CDU because he knew I was looking for the tube to homebrew a QRP transmitter for my winter project. I have made one unit each of a transmitter and a HF amplifier for QRP.
Today, I up-load this article of a 2E26 transmitter with a picture as well as the schematic. Please challenge to homebrew this transmitter because the 2E26 tube is still available and it requires a minimum number of parts that you will come across to obtain in a ham fest or even in your junk box. I use FT-243 Xtals on 40m and other types for the rest of bands so I installed two alligator clips to handle this situation. I encourage you to use your ideas and imaginations to make this transmitter such as using a bread board. Please e-mail me if you have some questions.
73.
Hiro Hayashi, VE3CGC ve3cgc@hotmail.com
In Japanese:
「2E26 QRP 送信機」
本日は自作2E26 QRP 送信機 について書きます。 もともとの配線図はW9TFCより、いただいたもので、真空管2E26はVE6CDUより3本いただいたものです。 配線図は私なりに少し改造してあります。 パイコイルは売ってないので、手持ちの材料で自作しました。
パワー4w、クリスタル発振、CWの簡単な送信機ですので、自作に挑戦してみてください。 部品は古いラジオから取ったり、ジャンク市、自分のジャンクボックスなどから探し出せます。 自分のアイデアで作ってみてください、例えば、ブレッドボード式にしても、自分だけの、面白い送信機が出来上がり、愛着もわきます。 写真と配線図を載せますので、見てください。 絵をクリックすると大きくなります。
この送信機で、北米大陸の半分はカバーできますし、条件が良ければ、大西洋から太平洋まで届きます。 私は、2w 20mバンド、ダイポールアンテナでヨーロッパのフランスの局とQSOもしており、思わぬQRPの楽しさが味わえます。 質問があればメールください。
73.
はやし ひろ VE3CGC ve3cgc@hotmail.com